RTB 10-PE Screw Connection Iron Conductor Electric Din Rail Ground Terminal Block

RTB series economic screw clamp Terminal Blocks are the next generation terminals with an improved 1000 V rating as per IEC guidelines. Feed through terminals of different wire sizes have the same outer profile. Cross connection of these Terminal Blocks can be done using insulated pluggable jumpers, available in various pole configurations.

Gound/Earthing Terminal Blocks with specially designed alloy feet which help in achieving very low contact resistance and vibration proof grounding with the DIN rails. They are green / yellow colour coded as per industry standards.

Cross connection of these Terminal Blocks can be done using standard pluggable jumpers.

Multi connect 3 wire & 4 wire screw clamp Terminal Blocks are used to eliminate reliability problems encountered when there is a need to connect multiple wires in a single Terminal Block.

Compact double level Screw Clamp Terminal Block. This Terminal Block is used in high density wiring applications.

Jumpering is possible at both levels. This Terminal Block is suitable for 1000 V rating.

PV is double level internally shorted screw clamp Terminal Block. This is an ideal choice for distribution application.

 is double level Terminal Block with a grounding point for terminating grounding cables on the lower level of the terminal block while

the top level is a standard feed through terminal.

The earth connection is made by snapping the terminal on the Din rail. This separate connection point is appropriately identified by the green

yellow imprint on its top.

 KK/KKB is double level ground Terminal Block with 4 connection points for grounding wires. It is available in a standard green yellow colour to indicate the grounding connection.

Fuse Terminal Blocks are used in electrical and control systems which require fuse protection.

Disconnect blocks are used for measuring, control and regulatory circuits.