OEM/ODM Manufacturer Fuse Terminal Block - RUT 1KV volt screw terminal – Huntec

Short Description:

Product Detail

Product Tags

Feedback (2)

Quality first, Honesty as base, Sincere service and mutual profit is our idea, in order to develop continuously and pursue the excellence for 25mm Gland, steel conductor terminal block, Electrical Vehicle Light Vent Plug, Welcome all nice buyers communicate details of products and ideas with us!!

OEM/ODM Manufacturer Fuse Terminal Block - RUT 1KV volt screw terminal – Huntec Detail:

Technical Parameter

Prod.Desp.	Din Rail Terminal Block-RUT Series Screw Connection RV
Item No.	RUT2.5/RUT4/RUT6/RUT10/RUT16/RUT4-TWIN/RUT4-QUATTRO/RUTTT4/RUT4-HESI/RUT4-HEDI/RUT4-MT/RUT4-MP-P/P)/RUT6-RTK/S)/RUT6-T-HV/RUT6-T-HV P/P)/RUT2.5-PE/RUT4-PE
Material:	PA/Brass
Thickness(mm)	5.2/6.2/8.2/10.2/12.2
Width(mm)	47.7-55.3
Depth(mm)	47.5-55
Connection	Screw
Cross Section(mm²)	0.14–25.0(Solid Wire)/0.14-25.0(Flexible Wire) AWG26-4
Rated Voltage(V)	1000
Rated Current(A)	24-76
Strip Length(mm)	8-14
Flammability:	V0
Standard	IEC60947-7-1;GB/T14048.7
DIN Rail:	U
Color:	Grey(Optional: Blue/Red/Yellow/Green),Yellow-Green
End Plate	D-RUT2.5/10;16;2.5/4-TWIN;4-QUATRO;TTB4;4-HESI;4-MT-P/P;6-RTK;6-T-HV P/P
Marking Strip:	ZB
Jumper	FBS
Certificate	CE;RoHS,Reach

Gound/Earthing Terminal Blocks with specially designed alloy feet which help in achieving very low contact resistance and vibration proof grounding with the DIN rails.

They are green / yellow colour coded as per industry standards.

Cross connection of these Terminal Blocks can be done using standard pluggable jumpers.

Multi connect 3 wire & 4 wire screw clamp Terminal Blocks are used to eliminate reliability problems encountered when there is a need to connect multiple wires in a single Terminal Block.

Compact double level Screw Clamp Terminal Block. This Terminal Block is used in high density wiring applications.

Jumpering is possible at both levels. This Terminal Block is suitable for 1000 V rating.

PV is double level internally shorted screw clamp Terminal Block. This is an ideal choice for distribution application.

is double level Terminal Block with a grounding point for terminating grounding cables on the lower level of the terminal block while

the top level is a standard feed through terminal.

The earth connection is made by snapping the terminal on the Din rail. This separate connection point is appropriately identified by the greenyellow imprint on its top.

KK/KKB is double level ground Terminal Block with 4 connection points for grounding wires. It is available in a standard green yellow colour to indicate the grounding connection.

Fuse Terminal Blocks are used in electrical and control systems which require fuse protection.Disconnect blocks are used for measuring, control and regulatory circuits.

Dimension

RUT V1.0 (10)

BOM

No.	Part Desp.	Material	Surface Finishing	Qty	Color	Remark
1	House	Nylon	/	1	Grey	UL94 V-0
2	Screw	Brass	Nickel	2	Natural	/
3	Conductor	Brass	Nickel	1	Natural	/
4	Cage	Brass	Nickel	2	Natural	/

Accessory

UBE/D KLM-A UC-TMF6 E/UK(N)

Terminal marker block, used Mark for terminal on guide rail Remember, can write identification number

Used for wiring when the terminal is used, it is used in the middle Grouping marks between, used in fixed Middle mounting and marking identification of pieces

Professional design in Wiring terminals are used in the usual In this case, you can use a blank mark

Write or use typography 1-100 Characters, special characters can be customized

Used in the end The first and the last parts of the device are fixed terminals Function, usually in a group With the two.

End plate: used for the bare metal part of the terminal at the end of the product to protect the terminal from oxidation.

The grouping partition is used to separate and break the connection between terminals when different terminals are used, and can also play the effect of grouping

TS35Made of steel, galvanized surface, used for installing and fixing terminal.

EB10-5 The SIDE BRIDGE IS USED TO short and CONNECT adjacent TERMINALS. It can be cut short according to the specific application. It can be used to connect all terminals between two and ten terminals

FBS 10-5Plug BRIDGE, Used for short circuit connection between TERMINALS, 2 poles, 3 poles, 4 poles, 5 poles AND 10 poles can be used to CONNECT according to different situations.

Storage Condition

Stored in the air circulation and relative humidity is not more than 80%, the temperature is not higher than +40℃, not less than -10℃ warehouse;
Storage of ambient air free from acidic, alkaline or other corrosive gases.

Environmental compliance

Product design meets Rosh requirements.

Product detail pictures:

Related Product Guide:

We retain bettering and perfecting our merchandise and service. At the same time, we do the job actively to do research and improvement for OEM/ODM Manufacturer Fuse Terminal Block - RUT 1KV volt screw terminal – Huntec , The product will supply to all over the world, such as: South Korea, Brasilia, Kenya, Our company offers the full range from pre-sales to after-sales service, from product development to audit the use of maintenance, based on strong technical strength, superior product performance, reasonable prices and perfect service, we will continue to develop, to provide the high-quality products and services, and promote lasting cooperation with our customers, common development and create a better future.

100 Amp Connector Block