RPV10 Top Contact Push-in Terminal Block
Technical Parameter
| Prod.Desp. | Din Rail Terminal Block-RPV Series Top Contact Push-in Spring Connection |
| Item No. | RPV10 |
| Material: | PA/Brass |
| Thickness(mm) | 10.2 |
| Width(mm) | 67.7 |
| Height(mm)(U7.5/U10/U15) | 51.3/53.8/58.8 |
| Connection | Spring Push-in |
| Cross Section(mm2) | 0.5--16.0(Solid Wire)/0.5-10.0(Flexible Wire) AWG20-6 |
| Rated Voltage(V) | 1000 |
| Rated Current(A) | 57 |
| Strip Length(mm) | 15-18 |
| Flammability: | V0 |
| Standard | IEC60947-7-1;GB/T14048.7 |
| DIN Rail: | U |
| Color: | Grey(Optional: Blue/Red/Yellow/Green) |
| End Plate | D-RPV10 |
| Marking Strip: | ZB10 |
| Jumper | FBS2-10/5-10 |
| Certificate | CE/RoHS/REACH |
| Standard | IEC60947-7-1 GB/T14048.7 |
Dimension
BOM
|
No. |
Part No. |
Material |
Q’TY |
Color |
Remark |
|
1 |
House |
Nylon |
1 |
Grey |
UL94 V-0 |
|
2 |
Button |
Nylon |
2 |
Orange |
/ |
|
3 |
Spring Cage |
SS |
2 |
Natural |
/ |
|
4 |
Conductor |
Brass |
1 |
Natural |
/ |
Accessory
UBE/D KLM-A UC-TMF6 E/UK(N)
|
Applying for marking terminals, contents can be customized.
|
Applying for grouping mark in
the middle when terminal is used, for mounting and mark identification in the middle of fastener. |
Specially designed for terminal, can be written with blank marker or printed with 1-100 characters under normal circumstances, special characters can be customized. | Applying to fasten terminals at both ends, usually two in a group.
|
UC-ZB6
D-RPV4
D-RPV4
TS35/7.5
|
Specially designed for terminal, can be written with blank mark or printed with 1-100 characters under normal circumstances, special characters can be customized. |
Applying to close the exposed metal part of the terminal to protect the terminal from oxidation.
|
Applying for short circuit connection between terminals, according to different terminal qyt can choose 2, 3, 4, 5 and 10 poles to achieve connection.
|
Made of steel, galvanized surface, used for installing and fixing terminal. |
Storage Condition
Stored in the air circulation and relative humidity is not more than 80%, the temperature is not higher than +40℃, not less than -10℃ warehouse;
Storage of ambient air free from acidic, alkaline or other corrosive gases.
Environmental compliance
Product design meets Rosh requirements.
