Top Contact push-in spring terminal block-RPV6
Introduction
Top Contact push-in spring terminal block-RPV6, mainly with industrial wiring, in the line for the transmission of current and electrical signal transmission, is one of the indispensable connectors in the industrial field.
The compact design saves space and allows quick and easy connection of solid wire and flexible wire with cold connector without the use of any tools;To remove a wire, press the orange button using a flat-head screwdriver. Save time and effort.
Product Image
Dimension(mm)
BOM
|
No. |
Part Desp. |
Material |
Q’ty |
Color |
Remark |
|
1 |
House |
PA |
1 |
Grey |
UL94 V-0 |
|
2 |
Button |
PA |
2 |
Orange |
UL94 V-0 |
|
3 |
Cage |
SS |
2 |
Natural |
/ |
|
4 |
Conductor |
Brass |
1 |
Natural |
/ |
Accessory
UBE/D
Terminal marker, used for marking terminals on din rails, can write identification number.
KLM-A
Mark clip, used for grouping mark in the middle when terminal is used, for mounting and mark identification in the middle of fastener.
UC-TMF8
Marker bar, specially designed for terminal, can be written with blank marker or printed with 1-100 characters under normal circumstances, special characters can be customized.
E/UK(N)
End bracket used to fasten terminals at both ends, usually two in a group
UC-ZB8
Mark bar, specially designed for terminal, can be written with blank mark or printed with 1-100 characters under normal circumstances, special characters can be customized.
D-RPV6
End plate, used to close the exposed metal part of the terminal to protect the terminal from oxidation.
FBS 10-8
Plug-in jumper, used for short circuit connection between terminals, according to different terminal qyt can choose 2, 3, 4, 5 and 10 poles to achieve connection.
guide
Series din rail, made of steel, galvanized surface, used for installing and fixing terminal.
Storage Condition
Stored in the air circulation and relative humidity is not more than 80%, the temperature is not higher than +40℃, not less than -10℃ warehouse;
Storage of ambient air free from acidic, alkaline or other corrosive gases.
Environmental compliance
Product design meets RoHS requirements.
